POSIFLEX LM-30 Series, Руководство пользователя

Страница: 5 / 20

Installing LM/TM-30XXE/32XXE
According to the model type of your monitor and terminal, the relevant
instructions are provided below to help you mount your monitors onto your
Posiflex terminals. During installation, please ensure the terminal is properly
turned off and disconnected from the power sources to avoid potential hazards.
Mounting to HS series Terminals
1. Lay your POS terminal on a flat surface with
its rear facing towards you.
2. Press down the release tab of top I/O interface
cover.
3. Pull the top I/O cover in the direction shown
by the arrow in the figure to remove the cover.
4. Position the monitor on a flat surface. While
keeping it steady with one hands, pull the rear
mounting bracket upright as shown in the
figure.
5. Support your monitor to align its mounting
bracket with four screw holes at the back of
your terminal. Secure the mounting bracket
with four #6-32-10L fixing screws.
5