9
4.
Position your terminal in
Full Extended mode
.
4.1
Support the screen with one hand holding onto its bottom edge. Then, while
pulling the lever backwards, move the display upwards until the lever is
snapped into the lower hook to raise the screen as shown in the below figure.
Upper
hook
4.2
Push the cable cover back.
4.3
Tilt the screen up or down to your desired angle.
Please do not press on the screen while setting up the
tilt angle.
5.
Position the terminal in
Low Profile mode
5.1
First, remove the cable cover. Then, support the screen with one hand
holding onto its bottom edge. While pulling the lever backwards, move the
display upwards or downwards until the lever is snapped into the upper
hook as the below figure shows.
5.2
Push the cable cover back.
5.3
Tilt the screen up or down to your desired angle.
Please do not press on the screen while setting up
the tilt angle.
Upper
hook
Lower
hook
