KB6000 Series User’s Manual
2 - 1
II. INSTALLATION
A. CABLE CONNECTION
Take the interface cable out from the accessory bag. This cable
has a 6 pin DIN male plug (big head) at one end and a mini DIN PS/2
male plug (small head) at the other. Connect the big head of the cable to
the 6 pin DIN female connector at the left of the bottom of the
programmable keyboard. Connect the other end (6 pin mini DIN male
plug) to the PS/2 keyboard port of a PC or compatible system. This
connection between the programmable keyboard and the host system
must be done before system power up for the application under some
operating systems. Connect the PS/2 keyboard or any other PS/2
keyboard wedged input device such as a CCD scanner to the 6 pin mini
DIN female connector at the bottom of the programmable keyboard if
such connection is required.
B. INSTALLATION ON TP7000 SERIES
Please follow instructions in TP7000 manual to fix the fixation
tags to the base of TP7000 for holding KB6000 series keyboard. Align
the cavities on bottom of KB6000 series to the fixation tags on TP7000
to hold the KB6000 in place after the cable connection completed.
C. UTILITY INSTALLATION
There are in total three methods to program the programmable
keys in KB6000 series keyboard: “RWM.EXE” the straightforward
direct read/write programming utility under DOS or Windows DOS box;
“KBM.EXE” the normal programming utility under DOS or Windows
