POSIFLEX Jiva KS-6615 Series Скачать руководство пользователя страница 46

Страница: 46 / 74

KS-6615 / KS-6617 series Technical Manual 5 - 16

Enable PIR

– This check box is not applicable to the monitor. Please keep

it unchecked.

Enable Touch

– This check box must be checked to have the touch panel

working.

Touch as Right Button Click

– This check box defines each touch on

touch panel as clicking the right button of mouse at that point. When it is

unchecked, each touch will work as clicking the left button of mouse. (Ref.

to the right hand version of mouse)

Mouse Emulation/Click on Touch/Click on Release

– Only one of the

three radio buttons can be selected. The mouse emulation refers to the drag

and drop function.

– This button accepts all parameters set and closes the utility window.

Apply

– This button accepts all parameters set and remains in the utility

window.

Cancel

– This button discards all changes to the parameters and closes the

utility window.

USB TOUCH CALIBRATOR

This program helps re-calibrating the

touch position with the USB mouse emulation.

Please touch the 3 or 9 calibration boxes and a

confirmation box that appear sequentially.

Содержание Jiva KS-6615 Series











































































Результаты поиска

Содержание Jiva KS-6615 Series

Отзывы:

POSIFLEX Jiva KS-6615 Series, Техническое руководство, Страница: 46 / 74

Результаты поиска

Содержание Jiva KS-6615 Series

Отзывы: