Posi Pin CR-R885-S, Инструкция по установке и эксплуатации

Страница: 16 / 23

14 Installation and Operating Instructions
SECTION [204] USER CODE RESET
User Code Reset is used to delete all the User Codes (from User Code 000
to 999 ).
When the User Codes are reset, it may require several seconds for
the system to update the programming. The reader emits a
confirmation beep once the modification is complete.
To reset all User Codes:
1. Press and hold the
[
CLEAR
] key for 4 seconds.
The reader emits a confirmation beep, the green LED illuminates and
the red LED extinguishes.
2. Enter [
MASTER CODE
1 or
MASTER CODE
2] and press the [
ENTER
] key.
Reader emits a confirmation beep and the red and the green LEDs
flash simultaneously.
3. Enter [204] and press the [
ENTER
] key.
Reader emits a confirmation beep and the red and the green LEDs
flash alternately.
4. Press the [1] key and then press the [
ENTER
] key to confirm the reset.
The reader emits a confirmation beep when the User Codes are
deleted.