Posi Pin CR-R885-S, Инструкция по установке и эксплуатации

Страница: 13 / 23

PosiPin 11
MASTER PROGRAMMING
Master Programming Mode is used to program Master and User Codes.
SECTIONS [201] AND [202] CHANGING THE MASTER CODES
Master Code 1 (default: 111111) is used to program both Master Codes, the
User Codes and the
Section [002] Door Lock Control (see page 7). Master
Code 2 (default: 222222) can program the User Codes and change its own
PIN. Master Code 2
cannot program Master Code 1 or the Door Lock
Control. In the desired section enter the 6-digit personal identification
number (PIN) where each digit can be any value from 0 to 9.
SECTION [203] USER CODE PROGRAMMING
Master Code 1 and 2 can activate cards and program the personal
identification numbers (PIN) for the User Codes. PosiPin includes 1000
User Codes. User Code
000 to 999 can be 1 to 8 digits in length where
To change the Master Codes:
1. Press and hold the
[
CLEAR
] key for 4 seconds.
The reader emits a confirmation beep, the green LED illuminates and
the red LED extinguishes.
2. Enter [
MASTER CODE
1 or
MASTER CODE
2] and press the [
ENTER
] key.
Reader emits a confirmation beep and the red and the green LEDs
flash simultaneously.
3. Enter [201] to change Master Code 1 or [202] to change Master
Code 2 and press the [
ENTER
] key.
Reader emits a confirmation beep and the green LED becomes
constant.
4. Enter the new PIN and press the [
ENTER
] key.
The reader emits a confirmation beep and the green LED flashes.
5. To exit, press and hold the [
CLEAR
] key for 4 seconds.
The reader emits a rejection beep and the green LED extinguishes.