Posi Pin CR-R885-A, Инструкция по установке и эксплуатации

Страница: 13 / 16

PosiPin 11
FACE LIGHT COLOUR
Section [104] [104] [104] [104] - Default: [0] [0] [0] [0]
The Face Light’s colour can be red or green as desired.
This feature only applies when Face Light Operation
programmed in Section
[103] is set for Option [0] : Face Light
constant.
CHANGING THE INSTALLER CODE
Section [200] [200] [200] [200] - Default: 000000
The Installer Code is used to enter PosiPin’s programming mode.
The Installer Code is six digits long where each digit can be any
value from 0 to 9.
PANIC ALARM
A panic code can be generated and transmitted to the controller by
pressing and holding the
[
CLEAR
] and [
ENTER
] keys for 2 seconds
(26-bit Wiegand = 255:65534; 37-bit Wiegand = 65535:65534).
This feature only applies when the communication format
programmed in Section
[002] is set for Option [1] : 26-bit
Wiegand or Option [2] : 37-bit Wiegand.
Enter3 Description
[0] Red Face Light
[1] Green Face Light