Operation
At outdoor temperatures below 0°C, let the machine idle for approximately five minutes
to allow the hydraulic system to reach the correct operating temperature (the hydraulic pipes
will then be warm to the touch).
"Autospeed"
"Autospeed" enables pressure-controlled switching between the two feed speeds.
▪ "Autospeed" responds to the required splitting pressure and automatically adjusts the
splitting speed.
The advantages:
Automatic pressure-controlled switching between the two feed speeds gives a faster
working speed.
▪ This in turn leads to a 30% increase in splitting performance.
The smooth, gentle switchover ensures the minimum of hydraulic wear.
Position
Function
0
Control levers in home position, splitting tool does not move.
I
Both control levers pressed downwards simultaneously. As long as the
control levers remain in this position, the splitting tool continues to
extend.
▪ The splitting speed is matched to the splitting pressure.
II
If both control levers are pressed upwards simultaneously, the splitting
tool returns to its home position and then goes back to position "0".
In the case of switched off machines with "Autospeed", the splitting tool can fall
independently.
This slow fall is caused by the "Autospeed" valve and thus normal status.
5
5.1
Operation
18
