31
(17) Integrated Printer: Printer settings
The printer properties(baudrate, density etc.) can be changed from the printer's 'Setting mode'.
To enter 'Setting mode' :
1.
Turn off the printer to press reset button.
2.
Ensure that the paper roll is inserted properly and the end of the roll is outside the printer with the cover
securely fixed.
3.
While holding down the FEED button, turn on the printer to press reset button.
4.
The printer's 'Self-test' will begin.
5.
Information about the printer's current state will be printed.
6.
After 5 seconds without releasing the FEED button, the printer will enter 'Setting mode'.
7.
The following properties available to be set will be printed:
*** Setting Mode ***
Interface : Serial
1.
Step by Step
2.
Serial Baudrate
3.
Serial Handshaking
4.
Error Sound
5.
Density
6.
Auto Cut
7.
Code Page
8.
USB Mode
9.
Black Mark Mode
10.
Auto Load Mode
11.
Sensing Level
12.
Setting the paper width
* The following table shows the available options for each property in 'Setting mode'.
