System Overview
ROBO-8910VG2A User’s Manual
1-2
1.2 Check
List
The ROBO-8910VG2A package should cover the following basic items:
One ROBO-8910VG2A single host board
One dual Serial ports cable kit
One Parallel port cable kit
One FDC cable
One IDE cable
Two 7-pin SATA signal cables
One Installation Resources CD-Title
One booklet of ROBO-8910VG2A
Optional
:
One bracket with PS/2 keyboard and mouse
If any of these items is damaged or missing, please contact your vendor and keep all
packing materials for future replacement and maintenance.
1.3 Product
Specification
Main processor
- Intel
®
Pentium
®
4/Celeron D Processor
- FSB: 800/533MHz
BIOS
Phoenix (Award) system BIOS with 4Mb Flash ROM with easy upgrade function
ACPI, DMI, Green function and Plug and Play Compatible
Main Memory
- Support single channel DDR2 memory interface
- Non-ECC, non-buffered DIMMs only
- Two DIMM sockets support 533/400 DDR2-SDRAM up to 2GB System Memory
L2 Cache Memory
Built-in Processor
Chipset
Intel 915GV GMCH and ICH6 chipset
Bus Interface
- Follow PICMG 1.3 Rev 1.0 standard (PCI Express and PCI)
- Support four PCI Express x1 through backplane
- Support for PCI devices through backplane
- Project based to support PCI Express x16 by changing GMCH to Intel 915G
IDE Interface
Support one enhanced IDE port up to two HDD devices with PIO mode 4 and
Ultra DMA/33/66/100 mode transfer and Bus Master feature