System Installation
ROBO-8910VG2A User’s Manual
3-3
3.3
Installing the Single Board Computer
To install your ROBO-8910VG2A into standard chassis or proprietary environment,
you need to perform the following:
Step 1: Check all jumpers setting on proper position
Step 2: Install and configure CPU and memory module on right position
Step 3: Place ROBO-8910VG2A into the dedicated position in your system
Step 4: Attach cables to existing peripheral devices and secure it
Note:
Please refer to section 3-3-1 to 3-3-4 to install INF/VGA/LAN/Audio drivers.
