Portwell ROBO-8115VG2AR, Руководство пользователя

Страница: 94 / 98

ROBO-8115VG2AR
Copyright © Portwell 2021 ROBO-8115VG2AR User's Guide 94
Serial ATA
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a time;
The installation of Serial ATA is simpler and easier than IDE, because SATA hard disk doesn’t require setting up Master and Slave, which can reduce mistake of
hardware installation.
ROBO-8115 can support four SATA interface (SATAIII, 6.0Gb/s) on board. It has SATA ports on board.
7.2 BIOS Setting
It is assumed that users have correctly adopted modules and connected all the devices cables required before turning on ATX power. DDR4 long DIMM Memory,
keyboard, mouse, SATA hard disk, VGA connector, power cable of the device, ATX accessories are good examples that deserve attention. With no assurance of
properly and correctly accommodating these modules and devices, it is very possible to encounter system failures that result in malfunction of any device.
To make sure that you have a successful start with ROBO-8115, it is recommended, when going with the boot-up sequence, to hit “delete” or ”ESC” key and
enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.