Portwell ROBO-8115VG2AR, Руководство пользователя, Страница: 87 / 98

ROBO-8115VG2AR
Copyright © Portwell 2021 ROBO-8115VG2AR User's Guide 87
Feature Description Options
Terminal Type
Emulation: ANSI: Extended ASCII char set. VT100: ASCII char set.
VT100+: Extends VT100 to support color, function keys, etc. VT-UTF8:
Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.
★
ANSI, VT100, VT100+, VT-UTF8
Bits per second
Select Serial port transmission speed. The speed must be matched on
other side. Long or noisy lines may require lower speeds.
★
115200, 9600, 19200, 38400, 57600
Data bits Data bits
★
8, 7
Parity
A parity bit can be sent with the data bits to detect some transmission
errors. Even: parity bit is 0 if the num of 1’s in the data bits is even. Odd:
parity bit is 0 if num of 1’s in the data bits is odd. Mark: parity bit is always 1.
Space parity bit is always 0. Mark and Space Parity do not allow for error
detection. They can be used as an additional data bit.
★
None, Even, Odd, Mark, Space
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the
beginning). The standard setting is 1 stop bit. Communication with slow
devices may require more than 1 stop bit.
★
1,2
Flow Control
Flow control can prevent data loss from buffer overflow. When sending
data, if the receiving buffers are full, a ‘stop’ signal can be sent to stop the
data flow. Once the buffers are empty, a ‘start’ signal can be sent to re-start
the flow. Hardware flow control uses two wires to send start/stop signal.
★
None, Hardware RTS/CTS
VT-UTF8 Combo Key
Support
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals
★
Enabled, Disabled
Recorder Mode
With this mode enabled only text will be sent. This is to capture Terminal
data.
★
Disabled, Enabled
Resolution 100x31
Enables or disables extended terminal resolution
★
Disabled, Enabled
Putty KeyPad Select FunctionKey and KeyPad on Putty
★
VT100, LINUX,XTERMR6, SCO,ESCN,VT400