Portway Luxima Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 60

Portway Luxima Скачать руководство пользователя страница 39

SECTION FIVE - USER INSTRUCTIONS

5.1 INSTALLATION INFORMATION

CONDITIONS OF INSTALLATION

It is the law that all gas appliances are installed only by a competent (e.g.

Registered) Installer, in accordance with the installation instructions and the Gas

Safety (Installation and Use) Regulations 1998. Failure to install appliances

correctly could lead to prosecution. It is in your own interest and that of safety to

comply with the law.

The stove may be fitted below a combustible shelf provided that the shelf is at

least 200mm above the top of the appliance and the depth of the shelf does not

exceed 150mm.

The stove may be installed below combustible shelves providing that the clearance

above the stove is a minimum of 225mm.

This stove is a heating appliance, therefore all external surfaces of the product are

classified as a working surface and will become hot during use of the stove.

DO NOT UNDER ANY CIRCUMSTANCES USE THIS APPLIANCE IF THE

GLASS PANEL IS BROKEN OR NOT SECURELY FIXED TO THE DOOR

ASSEMBLY.

DO NOT OPERATE THIS STOVE WITH THE DOOR IN THE OPEN POSITION

UNDER ANY CIRCUMSTANCES.

The Model number of this appliance is as stated on the rating plate affixed to the

front of the burner assembly on the stove and it is manufactured by :-

BFM Europe Ltd

Trentham Lakes

Stoke on Trent

ST4 4TJ

38

«
...
37
38
39
40
41
...
»

Содержание Luxima





























































Отзывы:

Нет отзывов