5
Click on the red „Submit and Reboot“ button after having changed the configuration data. All pa-
rameters will be checked for correctness. If all parameters are correct, the web!SIGN101 loads the
new configuration and reboots.
If incorrect data has been detected, an error message is displayed.
5.2. LAN
Note:
A wrong network configuration can compromise the stability of the whole network and
cause a breakdown of the network. Please contact your network administrator before
making changes to the LAN configuration of the web!SIGN101!
web!SIGN101 is shipped with DHCP setting and will receive the network configuration from a DHCP
server. Do not change this setting unless a static network configuration is required.
Change from DHCP to a static IP address
Perform the following steps if a static IP address is required:
Select radio button „
Static
“
Enter your new configuration:
IP-Address:
IP address of the web!SIGN101
Netmask:
Network mask
Gateway:
IP address of the gateway
DNS-Server:
IP address of the DNS server
Change from a static IP address to DHCP
Select radio button „
DHCP
“
Change the host name
Host name:
Enter a new host name
5.3. System
Time zone:
The local time is required for all time dependent functions. Please select your local time zone.
Time Zone:
System time zone
Select Time Zone:
Select your time zone from the drop down menus
Time Server:
The web!SIGN101 requires an external time server to get the actual date and time:
Time Server 1:
Address of time server 1
Time Server 2:
Address of time server 2
If another time server is available in the network, enter the host name or IP address.
Display on/off time:
Display off [h]:
Enter an hour [0-23] to switch the display off
Display on [h]:
Enter an hour [0-23] to switch the display on
For display always on, leave the two fields empty.
