USER MANUAL
–
Portman Custom Lights P3 PIX3L
Lamp and fuse replacement
To replace the lamp:
•
Disconnect the fixture from AC power.
•
Make sure the fixture is cool.
•
Open the front cover by releasing 2 screws located
on right and left side of the front cover.
•
Gently push the lamp towards one of the
•
mounting brackets and remove the used lamp by
pulling it up.
•
Put the new lamp onto the mounting brackets.
•
Do not touch the new lamp with bare hands. Use
gloves or a cloth to hold the lamp.
•
Close the front cover and fasten the side
screws before applying power.
REMEMBER!
Always use safety glasses to protect your eyes
when changing a lamp!
To replace the fuse:
•
Disconnect the fixture from AC power.
•
Make sure the fixture is cool.
•
Open the back cover by releasing 2 screws located on the right and left sides. Fuses are located
on the dimmer board inside the fixture.
•
To unscrew the fuse holder use “flat
-
blade” screwdriver. First gently push the cover of the
fuse holder and rotate it a quarter turn clockwise.
•
After you unlock cover of the fuse holder pull it up and replace the fuse.
•
Put the cover with new fuse back to the fuse holder, gently push it with screwdriver and rotate
it a quarter turn counterclockwise.
