USER MANUAL
–
Portman Custom Lights P3 PIX3L
Preparation for use
AC power connection
The Portman Custom Lights P3 PIX3L must be installed at
200-240V and 50/60Hz
. Fixture automatically
detects the alternating current frequency. To power the fixture simply plug in the powerCon TRUE1 and
set the switch to “ON”.
Use only high quality 2.5 mm diameter or larger power feed cables. Make sure
you are always connecting the fixtures to a protected circuit with appropriate electrical ground. Do
never connect the fixture to a dimmer plug, even if it supplies proper current.
Only qualified electricians in accordance with all known electrical regulations can install the fixtures.
The P3 comes with power input cord terminated with powerCON TRUE1 on one end and Uni - Schuko
plug on the other end (for European market). If your cord has got no Uni
–
Schuko plug, or you want to
change the plug follow the rules from table below:
Connection
EU wires
US wires
Live
L
Brown
Black
Neutral
N
Blue
White
Earth
Green/Yellow
Green or Green/Yellow
REMEMBER!
Only qualified person can change or install the plug!
