10
(3) Speeding report: (min. speed is 0.1 km/Hr, max. speed is 1000 km/Hr).
Parameters: on/off, and speed
(4) GPS wakeup report:
While the device is in stop status, user can let the GPS go to sleep mode for power saving. If select GPS Sleep
ON, user can setup the wakeup report configuration/ or NO GPS wakeup report.
IF select GPS SLEEP OFF, GT2000NP/GT2500NP will follow the report sending rule in “When Moving”
section.
Power saving mode
While in Power saving mode, GT2000NP/GT2500NP will cut off the GPS power if there is no report to send.
Report configuration will be listed as: the fixed time report while moving, and wakeup report / or no GPS
wakeup report while stop. In this mode, in order to save power unit will cut power of GPS, only wake up GPS
at the time of send report.
GPRS dial-up procedure
1) GPRS always one-line
Parameters: Reconnect interval
While using this mode, when the unit can not searched GPRS signal, system will reconnect GPRS interval a
preset value. (e.g.: 1minute)
