8
Here is the section to set the 3 telephone numbers for speed dialing. Please refer to speed dialing button
operation.
3.[Report]:
Report setup can be configured in this section. To activate the function(s), please select “
√
” in checkbox and
fill in data in the textbox. There are 2 modes for the GT-2000, first is the Normal mode, and second is the
Power saving mode. In the normal mode, the GPS will be always activated if GT-2000 is in moving state.
However, if in Power saving mode, GT-2000 will turn off the GPS power if there is no report to send. Note
that user can configure the wakeup report if the device is in “stop” (not moving) state.
Normal mode, report will be summarized as:
(1) Fixed time report
Parameters: On/Off, and time.
(2) Fixed distance report
Parameters: On/Off, and distance. (min. distance is 0.1 km, max. distance is 100 km).
(3)Keep alive report
Parameters: On/Off, and interval time, retry times
Keep alive enable, system will send out keep alive information to server and wait acknowledge from server.
If within the certain request period, there is no acknowledge back, the system will close the connection and
will establish a new connection.
The parameters includes the keep alive “interval”, and within this interval the retry “times”.
