4
5
ASSEMBLY INSTRUCTIONS
1
1. Remove cap nuts (BB) and rubber ring (AA) from
the preassembled mounting screws on crossbar
(EE). Attach crossbar (EE) to the outlet box (not
included) with machine screws (DD). Note: The
preassembled mounting screws should protrude
away from the outlet box.
2
Hardware Used
x 3
Wire nut
3
CC
ASSEMBLY INSTRUCTIONS
4
4. Screw finial (A) onto the fixture (B).
5. Place fixture (B) onto crossbar (EE). Replace
rubber rings (AA) on crossbar (EE) and secure
with cap nuts (BB).
5
6
6. Install light bulb (not included). Use one 100-watt
max. standard-base bulb or one 23-watt standard-
base CFL bulb.
• Note: Before use, add silicone glass sealant between wall and canopy, leaving the bottom clear
so moisture can drip down.
Lowes.com/portfolio
Lowes.com/portfolio
EE
AA
BB
DD
Hardware Used
Hardware Used
Rubber ring
Rubber ring
Cap nut
Cap nut
Machine screw
Crossbar
Crossbar
x 2
x 2
x 2
x 2
x 2
x 1
x 1
B
B
B
B
AA
AA
BB
BB
B
DD
B
B
B
EE
EE
CC
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire.
Helpful hint:
If necessary, attach copper
ground wire to grounded outlet box.
3. Attach wire nuts (CC). Tape wire nuts (CC)
and wires together.
A
B
BB
EE
AA
B
or
