7
ASSEMBLY INSTRUCTIONS
8. Identify ground sides of supply connector (B) and
track section (F).
Insert supply connector (B) into track section (F) and
twist to secure.
Make sure the ground side of supply connector (B) aligns
9. Tighten support screws (D).
Install cover (C) and secure with screws (E).
B
C
10. Identify ground sides of track head assembly (G) and
track section (F).
Insert track head assembly (G) into track section (F).
Pull down the spring clip (H) and twist to secure.
Is the side with the two metal tabs.
Note:
The ground side of the
indented groove on the face of the two internal copper bars.
Note:
The track head assembly (G) must be aligned with
the ground side of the track section (F) to complete assembly.
Connector Ground:
2 Metal Tabs
Track Ground:
Groove Indentation
8
9
6
7
6. To install fixture on studs in a ceiling or a wall:
use wood screws (DD).
DD
F
Wood Screws
x 2
DD
Hardware Used
7. To install fixture on drywall or in a wall:
Use plastic anchors (EE) and wood screws (DD).
DD
F
Plastic Anchors
x 2
EE
Wood Screws
x 2
DD
EE
Hardware Used
E
D
F
Note:
The ground side of track head assembly (G)
track section (F) has an
10
F
G
H
with the ground side of track section (F).
Lowes.com/portfolio
Track Ground:
Groove Indentation
Track Head Ground:
2 Metal Tabs
Note:
The ground side of the track section (F)
has an indented groove on the face of
Note:
The ground side of supply connector (B)
is the side with the two metal tabs.
the two internal copper bars.
Note:
The ground side of the supply connector (B)
must be aligned with the ground side of the track
section (F) to complete assembly.
