4
Hardware Used
BB
x 2
Cap nut
Hardware Used
CC
x 3
Wire nut
2.
Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers, black
to black (power) and white to white (neutral).
Attach copper wire to ground wire.
Helpful
hint:
If necessary, attach copper ground wire
to grounded junction box.
3.
Attach wire nuts (CC). Tape wire nuts (CC)
and wires together.
DD
x 2
EE
x 2
FF
x 1
Crossbar
CC
AA
x 2
Rubber ring
ASSEMBLY INSTRUCTIONS
1
2
3
Machine screw
Mounting screw
1.Take off cap nuts (BB) and rubber ring (AA).
Then attach the crossbar (FF) by tightening
the machine screws (DD) securely into the
outlet box (not included). The mounting screws
(EE) should protrude away from the outlet box.
FF
EE
AA
BB
DD
Lowes.com/portfolio
4.Install the finial (I) onto the fixture (C).
I
ASSEMBLY INSTRUCTIONS
4
C
5. Place fixture (C) onto mounting screws (EE).
Then put the rubber ring (AA) onto mounting
screws (EE). Secure with cap nuts (BB).
5
EE
AA
BB
C
Hardware Used
BB
x 2
Cap nut
EE
x 2
AA
x 2
Rubber ring
6. Install light bulbs (not included). Use three
60-watt max. candelabra-base bulbs or
three 13-watt max. candelabra-base CFL
bulbs.
6
5
Mounting screw
Lowes.com/portfolio