READ ALL WARNINGS THOROUGHLY BEFORE USING THIS EQUIPMENT.
FAILURE TO COMPLY WITH THE FOLLOWING INSTRUCTIONS AND WARNINGS MAY RESULT IN
SERIOUS INJURIES AND/OR PROPERTY DAMAGE.
Use extreme caution when performing dunk-type activities on this unit.
During play, do not wear jewelry (rings, watches, necklaces, etc.) as these objects may entangle in
net, causing serious injuries.
During play, use caution to keep player's head and face away from the backboard, rim and net.
The use of a mouth guard is recommended to reduce the possibility of player’s teeth becoming
entrapped in the net.
Do not climb, slide or play on this unit.
Keep organic material away from pole base. Grass, litter, etc. could cause corrosion and/or
deterioration, resulting in structural failure.
Check pole and entire support system at least twice a year. Keep pole top covered at all times.
Check all components for excessive wear or signs of fatigue, and tighten all nuts and bolts.
Replace damaged or fatigued structural components and missing hardware immediately to prevent
structural failure and possible injuries.
Lubricate internal crank screw mechanism and all hinge points per maintenance instructions below.
Always store unit at the 10' goal height and remove crank handle to reduce the possibility of misuse
by unauthorized individuals.
Failure to follow these warnings and maintenance procedures may result in serious injury and/or
property damage. The owner of this equipment must ensure that all players know and follow these
rules for safe operation of the unit.
NOTE
– For aggressive play, use of the pole pad and backboard pad is highly recommended to
minimize injuries to players.
THE OWNER OF THIS EQUIPMENT IS RESPONSIBLE TO ENSURE THAT ALL INDIVIDUALS
FOLLOW THESE SAFETY AND OPERATING INSTRUCTIONS TO AVOID INJURIES OR PROPERTY
DAMAGE. PROPER USE AND SUPERVISION OF THIS EQUIPMENT IS ESSENTIAL TO HELP
REDUCE THE POSSIBILITY OF ACCIDENTS OR INJURIES.
MANDATORY MAINTENANCE
Inspect unit before each use for loose or missing hardware, damaged components, etc. and repair
or replace before using the unit.
Check concrete footings and anchor bolts for tightness, cracking or structural damage and make
any necessary repairs or replacements immediately.
At least semi-annually, spray all hinge points, anchor bolts and height adjustment crank
components with a high quality rust and corrosion inhibitor-type aerosol lubricant.
Clean glass backboard ONLY with mild soap and water, or an equivalent glass cleaner.
WARNING
WARNING
