4
Portable
Goals
Detail "D"
2
1
5
6
3
10
11
12
9
UPPER CORNER
& BACKSTAY
ASSEMBLY
4
PORTABLE SOCCER GOALS
1.
Locate crossbar and posts face-down on playing surface near where the goal will be used for play, for ease of
assembly. The goal will be raised to its playing position after assembly is complete.
2.
Assemble crossbar to each post
as shown in Detail "D".
3.
Assemble formed backstays to
posts as shown in Details "D" and
"E".
4.
Assembly of portable soccer goal
is now complete. CAUTION –
This step requires four adults
who are capable of lifting this
soccer goal. The assembled
portable soccer goal can now be
raised to its playing position, and
moved into place.
Proceed
immediately to Step 5 for
installation of anchor system.
FOOTING DETAIL
24'-4" - No. 475100, 465100
18'-4" - No. 448100
12'-4" - No. 442100
1'-6"
FRONT FACE OF
POSTS ALIGNS
WITH OUTER
EDGE OF COURT
LINE
1'-6" Ø
TOP OF FOOTING AT
POLE MUST BE AT
LEAST 1/2" ABOVE
PLAYING SURFACE
FOR PROPER DRAINAGE
24'-0" - No. 475100, 465100
18'-0" - No. 448100
12'-0" - No. 442100
CONCRETE FOOTING
2'-0"
3'-6"
SLOPE TOP OF CONCRETE
FOOTING APPROXIMATELY
3" BELOW GRADE FOR
PROPER DRAINAGE
3"
Detail "C"
1
2
"
CAUTION - Contact local utility
companies to locate buried electrical,
gas, water lines, etc. BEFORE
DIGGING HOLES FOR FOOTINGS.
Also check for overhead utiltiies.
Minimum recommended
footing size shown.
Increase size of footings
as required according to
local soil conditions.
