2
WARNING: SOME DUST CREATED BY POWER SANDING, SAWING,
GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES
contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
· lead from lead-based paints,
· crystalline silica from bricks and cement and other masonry products, and
· arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
GENERAL SAFETY RULES
WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure
to follow all instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS.
WORK AREA
1.
Keep your work area clean and well lit.
Cluttered benches and dark
areas invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust.
Power tools create
sparks which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a
power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
1.
Double insulated tools are equipped with a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install a polarized
outlet. Do not change the plug in any way.
Double Insulation eliminates
the need for the three wire grounded power cord and grounded power
supply system.
2.
Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is grounded.
3.
Don’t expose power tools to rain or wet conditions.
Water entering a
power tool will increase the risk of electric shock.
4.
Do not abuse the cord. Never use the cord to carry the tools or pull
the plug from an outlet. Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords immediately.
Damaged cords
increase the risk of electric shock.
5.
When operating a power tool outside, use an outdoor extension
cord marked “W-A” or “W”.
These cords are rated for outdoor use and
reduce the risk of electric shock.
PERSONAL SAFETY
1.
Stay alert, watch what you are doing, and use common sense when
operating a power tool. Do not use tool while tired or under the
influence of drugs, alcohol, or medication.
A moment of inattention while
operating power tools may result in serious personal injury.
901452 - 03-28-02.qxd 5/15/02 9:07 AM Page 2
