Porter-Cable PCXB515BG, Инструкция по эксплуатации

Страница: 18 / 24

18
MAINTENANCE
For your own safety, turn switch “OFF”
and remove plug from power source outlet
before adjusting and maintaining your
bench grinder. If power cord is worn, cut
or damaged in any way, have it replaced
immediately.
GENERAL MAINTENANCE
1. Regularly check the tool and use a soft
brush to remove accumulated dust.
2. Use only mild soap and damp cloth to
clean the tool. Do not use alcohol, petrol
or other similar cleaning agents.
3. Do not make contact with the grinding
wheels with any damp cloth.
4. Never let any liquid get inside the tool;
never immerse any part of the tool into a
liquid.
5. Wear safety goggles to protect your eyes
while cleaning.
6. Always make sure the eyeshields are
transparent and not blocking the view of
the grinding wheel.
7. In normal use, grinding wheels may
become cracked, grooved, rounded at the
edges, chipped, out of true or loaded with
foreign material. Cracked wheels should
WARNING
!
be replaced IMMEDIATELY. While any of
the other conditions can be remedied with
a dressing tool (included), new wheels
sometimes require dressing to make them
round.
8. If you must replace a wheel be sure to
obtain one with a safe rated speed at
least as high as the “NO LOAD” RPM
marked on your grinder’s nameplate.
Replacement wheels must have a 1/2 in.
(12.7 mm) center hole, 6 in. (150 mm)
diameter and should be a maximum of
3/4 in. (20 mm) wide. Test new wheels
for cracks and maintain the existing
sequence of retaining hardware. Be sure
the tool is unplugged before attempting
repairs.
●
Never use caustic agents to clean the
plastic parts of the tool.
● Water must never come into contact
with the grinder.
● The use of any other accessories is
not recommended and may result in
serious injury.
WARNING
!
ACCESSORIES AND ATTACHMENTS
AVAILABLE ACCESSORIES
Since accessories, other than those offered
by Porter-Cable, have not been tested with
this product, use of such accessories with
this tool could be hazardous. To reduce the
risk of injury, only Porter-Cable recommended
accessories should be used with this product.
A complete line of accessories is available
from your Porter-Cable Factory Service
Center or a Porter-Cable Authorized Warranty
Service Center. Please visit our Web Site
www.portercable.com for a catalog or for the
name of your nearest supplier.
Do not use any accessory unless you
have completely read the Instruction
Manual for that accessory.
WARNING
!
WARNING
!