English
9
PORTER-CABLE tools are properly lubricated at the factory
and are ready for use. However, it is recommended that,
once a year, you take or send the tool to a certified service
center for a thorough cleaning and inspection.
Cleaning
WARNING:
Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this.
WARNING:
Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
1. Turn off and remove battery from the saw.
2. Place a 5 gallon (19 liter) bucket under the drain plug.
Remove the drain plug by loosening the attached wing
nut and allow the water to empty into the bucket.
3. Slide the cutting cart off the rail system. Spray the cutting
cart with a hose or wipe with a grout sponge or rag.
4. Wipe the rails with a grout sponge or a rag. Spray
lubricants are not required on the guide rail or wheels.
5. Clean the water reservoir by wiping with a grout sponge.
WARNING:
Do not spray with water. Some water
may reach the motor area.
Use only mild soap and a damp cloth to clean the tool.
Many household cleaners contain chemicals which
could seriously damage plastic. Also, do not use gasoline,
turpentine, lacquer or paint thinner, dry cleaning fluids or
similar products. Try not to let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
Accessories
WARNING:
Since accessories, other than those
offered by PORTER-CABLE, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
PORTER-CABLE recommended accessories should be
used with this product.
A complete line of accessories is available from your
PORTER-CABLE Factory Service Center or a PORTER-CABLE
Authorized Warranty Service Center. Please visit our Web
Site www.portercable.com for a catalog or for the name of
your nearest supplier.
Blades
7" (178 mm)
Ceramic wheel
7" (178 mm)
Porcelain wheel
CAUTION:
The use of any other accessory
not recommended for use with this tool could
be hazardous.
Repairs
WARNING:
To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a PORTER-CABLE
factory service center or a PORTER-CABLE authorized
service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE:
Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP:
In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
•
FOR YOUR sAFETY:
Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.portercable.com/register.
THREE YEAR LIMITED WARRANTY
PORTER-CABLE will repair or replace, without charge, any
defects due to faulty materials or workmanship for three
years from the date of purchase for tools (two years for
batteries). This warranty does not cover part failure due to
normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.
portercable.com or call (888) 848-5175. This warranty does
not apply to accessories or damage caused where repairs
have been made or attempted by others. This warranty
gives you specific legal rights and you may have other rights
which vary in certain states or provinces.
In addition to the warranty, PORTER-CABLE tools are
covered by our:
1 YEAR FREE SERVICE:
PORTER-CABLE will maintain the tool
and replace worn parts caused by normal use, for free, any
time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE:
If you are not completely
satisfied with the performance of your PORTER-CABLE
Power Tool for any reason, you can return it within 90 days
from the date of purchase with a receipt for a full refund –
no questions asked.
LATIN AMERICA:
This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
To register your tool for warranty service visit our website at
www.portercable.com.
