7
DANGER
!
FAILURE TO FOLLOW THESE RULES MAY
RESULT IN SERIOUS INJURY.
Laser radiation, avoid direct eye exposure,
serious eye injury can result.
●
Do not use optical tools such as a
telescope or transit to view the laser
beam.
●
Position the laser so unintentional eye
contact will be avoided.
●
Do not operate the laser around children
or allow children to operate the laser /
power tool.
●
Do not disassemble. Modifying the
product in any way can increase the
risk of laser radiation. Use of controls
or adjustments or performance of
procedures other than those specified in
this manual may result in hazardous laser
radiation exposure.
●
Do not operate in explosive atmospheres,
such as in the presence of flammable
liquids, gases, or dust.
●
Turn the laser off when it is not in use.
●
Store idle product out of reach of children
and other untrained persons. Lasers /
power tools are dangerous in the hands
of untrained users.
●
Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one laser / power tool, may
create a risk of injury when used on
another laser / power tool.
●
Repairs and servicing MUST be
performed by a qualified repair facility.
Repairs performed by unqualified
personnel could result in serious injury.
●
Do not remove or deface warning labels.
Removing labels increases the risk of
exposure to radiation.
●
For indoor use only.
●
This product is intended for use in
a temperature range of 41°F(5°C) -
104°F(40°C).
ADDITIONAL SAFETY RULES FOR THE LASER
LASER RADIATION. AVOID DIRECT EYE
EXPOSURE.
Do not stare into the laser light
source. Never aim light at another person or
object other than the work piece. Laser light
can damage your eyes.
LASER RADIATION.
Never aim the beam at
a work piece with a reflective surface. Bright
shiny reflective sheet steel or similar reflective
surfaces are not recommended for laser use.
Reflective surfaces could direct the beam
back toward the operator.
DO NOT
use tinted glasses to enhance the
laser light. Tinted glasses will reduce overall
vision for the application and interfere with the
normal operation of the tool.
WARNING
!
WARNING
!
WARNING
!
