background image

5- ENG

D25806

RISK OF
UNSAFE 

OPERATION

• Reactive force of spray will cause

gun/wand to move, and could
cause the operator to slip or fall, or
misdirect the spray. Improper con-
trol of gun/wand can result in inju-
ries to self and others.

• Do not overreach or stand on an

unstable support. Grip gun/wand
firmly with both hands. Expect the
gun to kick when triggered.

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Unsafe operation of your pressure

washer could lead to serious injury
or death to you or others.

• Do not use chlorine bleach or any

other corrosive compound.

• Become familiar with the operation

and controls of the pressure washer.

• Keep operating area clear of all per-

sons, pets, and obstacles.

• Do not operate the product when

fatigued or under the influence of
alcohol or drugs. Stay alert at all
times.

• Never defeat the safety features of

this product.

• Do not operate machine with miss-

ing, broken, or unauthorized parts.

• Never leave wand unattended while

unit is running.

If proper starting procedure is
not followed, engine can kick-
back causing serious hand and
arm injury.

• If engine does not start after two

pulls, squeeze trigger of gun to
relieve pump pressure. Pull
starter cord slowly until resist-
ance is felt. Then pull cord rapidly
to avoid kickback and prevent
hand or arm injury.

• The spray gun/wand is a powerful

cleaning tool that could look like a
toy to a child.

• Keep children away from the pres-

sure washer at all times.

• Contact with hot surfaces, such

as engines exhaust components,
could result in serious burn.

• During operation, touch only the con-

trol surfaces of the pressure washer.
Keep children away from the pres-
sure washer at all times. They may
not be able to recognize the hazards
of this product.

RISK OF

HOT

SURFACES

RISK OF

ELECTRICAL

SHOCK 

• Spray directed at electrical outlets

or switches, or objects connected
to an electrical circuit, could result
in a fatal electrical shock.

• Unplug any electrically operated

product before attempting to clean
it. Direct spray away from electric
outlets and switches.

RISK OF INJURY

FROM SPRAY

• High velocity fluid spray can

cause objects to break, propelling
particles at high speed.

• Light or unsecured objects can

become hazardous projectiles.

• Always wear ANSI approved Z87

safety glasses.Wear protective cloth-
ing to protect against accidental
spraying.

• Never point wand at, or spray people

or animals.

• Always secure trigger lock when

wand is not in service to prevent
accidental operation.

• Never permanently secure trigger in

pull back (open) position.

Содержание D25806-025-2





















Отзывы: