background image

3- ENG

D25806

i

ndicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

indicates a potentially hazardous situation which, if not
avoided,may result in minor or moderate injury

used without the safety alert symbol indicates poten-
tially hazardous situation which, if not avoided, may

result in property damage.

This manual contains
information that is im-
portant for you to
know and understand.
This information re-
lates to protecting
YOUR SAFETY and
PREVENTING EQUIP-
MENT PROBLEMS. To
help you recognize
this information, we
use the symbols
below. Please read the
manual and pay atten-
tion to these sections. 

SAFETY GUIDELINES / DEFINITIONS

IMPORTANT SAFETY INSTRUCTIONS

Improper operation or maintenance of this product could result in serious
injury and property damage. 

Read and understand all warnings and operat-

ing instructions before using.

RISK OF 

EXPLOSION

OR FIRE

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Spilled gasoline and it’s vapors

can become ignited from cigarette
sparks, electrical arcing, exhaust
gases, and hot engine compo-
nents such as the muffler.

• Shut off engine and allow it to cool

before adding fuel to the tank.

• Use care in filling tank to avoid spilling

fuel. Move pressure washer away from
fueling area before starting engine.

• Heat will expand fuel in the tank

which could  result in spillage and
possible fire explosion.

• Keep maximum fuel level ½” below

top of tank to allow for expansion.

• Operating the pressure washer in

an explosive environment could
result in a fire.

• Operate and fuel equipment in well

ventilated areas free from obstructions.
Equip areas with fire extinguisher suit-
able for gasoline fires.

• Materials placed against or near

the pressure washer can interfere
with its proper ventilation features
causing overheating and possible
ignition of the materials .

• Never operate pressure washer in

an area containing dry brush or
weeds.

• Muffler exhaust heat can damage

painted surfaces, melt any materi-
al sensitive to heat (such as sid-
ing, plastic, rubber, or vinyl), and
damage live plants.

• Always keep pressure washer a mini-

mum of four feet away from surfaces
(such as houses, automobiles, or live
plants) that could be damaged from
muffler exhaust heat

• Improperly stored fuel could lead

to accidental ignition. Fuel im-
properly secured could get into
the hands of children or other un-
qualified persons.

• Store fuel in an OSHA approved

container, in a secure location
away from work area.

• Use of acids, toxic or corrosive

chemicals, poisons, insecticides, or
any kind of flammable solvent with
this product could result in serious
injury or death.

• Do not spray flammable liquids.

Содержание D25806-025-2





















Отзывы: