8
Sharpener Unit Safety
• Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
•
WARNING!
ALL adjustment nuts/bolts/knobs etc.. must be tightened before starting to work
with the machine.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
•
WARNING!
Always use the protective shields on the machine.
• Do not use a damaged grinding wheel. Before each use inspect the wheel for chips and
cracks or excess wear. The grinding wheel must be properly mounted and turn freely. Perform
a test run for at least 30 seconds without load. Do not use damaged, out of round or vibrating
grinding wheels.
• Immediately switch off the machine in case of considerable vibrations or if other malfunctions
occur. Check the machine in order to find out the cause.
• The outside diameter and the thickness of your accessory must be within the capacity rating
of your power tool.
!
Safety Warnings for Chainsaw Sharpener
Ultra Mk4 instructions v2.indd 8
Ultra Mk4 instructions v2.indd 8
06/11/2020 15:13
06/11/2020 15:13
