manualshive.com logo in svg
background image

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Please refer to the safety instructions, assembly instructions and parts list before setting-up, operating, 
maintaining and cleaning your Quik-Split machine. Keep this Instruction Manual safe so you may refer 
to it at any time.

Safety Rules

WARNING

Read and understand all the instructions before use. 

  
Failure to follow the instructions in this manual may cause 
electric shock, fire or other injury. 

  
This machine is strictly to be operated by one person.

WARNING: 

When using this 
machine, basic safety 
precautions should 
be followed to reduce 
risk of personal injury 
and machine damage. 
Read all instructions 
thoroughly before 
attempting to operate 
the machine.

2

Safety information

Essential Equipment for Your Protection

The Quik-Split 7 complies with all current safety standards. For your safety 
You must wear full protection as specified below.

Head, eye and hearing protection

Eye protection to EN166 – B

Hearing protection to EN 352-1: 2002

Face protection visor recommended

Hand protection

Gloves to EN 12477:2001

Foot protection

Boots to EN 20345:2011

Leg protection

Sturdy full length trousers - ideally to 
EN381 standard

Portek cannot be held liable for any injuries or 
damages that may occur, if the Quik-Split 7 is used in 
any inappropriate way, and/or if the device has been 
modified in any way.

© Copyright 2016
Nothing within this edition may be copied, reproduced 
or stored onto a retrieval system without the written 
approval of Portek. Specifications, descriptions and 
illustrative material in this manual are as accurate as 
known at the time of publication, but are subject to 
change without notice.

Содержание Quik-Split 7













Отзывы: