Portech MT-350 Mobile Trunk, Руководство по эксплуатации

Страница: 19 / 22

MT-350 Operation Manual 15
Step II: lift up phone.
Step III: dial
＊＊＊＃
, and set up all-to-dial code after hearing “beep” sound,
then press
＃
again to confirm.
If we need to set up more than one allow-to-dial codes, use
＃
to separate them
off.
Ex:
＊＊＊＃
0910
＃
beep 0920
＃
beep
It means that the allow-to-dial number is set to 0910 and 0920.
Step IV: hang up phone speaker and the setting process is over.
Q5: How to clear up the former setting of allow-to-dial
？
A : Each new setting will auto-cover over the former two settings.
Q6: How to quick-sending out codes
？
A : Press
＃
after dialing out phone call, it will be sent out immediately.
Q7: how many allow-to-dial codes can this machine memorize
？
A : 50 sets.
Q8: Can we use MT-350 to fax or make data preparation
？
A : Negative, only can perform voice function exclusively.
Q9: After setting up allow-to-dial code, why we can’t select the allow-to-dial route?
A : (1) Check if line (PSTN) is connected properly.
(2) The allow-to-dial function hasn’t been set up yet, i.e., not to follow the correct
setup procedure processing setup.
(3) This machine derives the line malfunction inspecting ability. If the line is out
of order, it will connect to GSM route in a forced way (have to set up local
code in advance).
Q10: If the MT-350 has no power on it, and its line connects to PSTN, can it dial out?