Portech MT-350 Mobile Trunk, Руководство по эксплуатации

Страница: 13 / 22

MT-350 Operation Manual 9
57aabb
It’s the function of dialing out phone call from GSM and generates echo-bell-sound
before starting to talk in the phone.
aa means echo-bell-sound time in a unit of 0.1 sec. ( 00-98).
bb needs to be inputted identical to aa. This function will disable if setting up to “00”.
If setting up to “99”, it won’t have time limit on it.
Notice:
that this echo function will be halt if there is actual echo sound, reply or vocal
response occurred therein.
Default setting =00 (turn off this function).
(12)GSM isn’t ready, call will be forced to dial out from PSTN
Format: *#** [Waiting for confirming voice]
59aabb
While GSM isn’t ready, the function will let the phone forcedly dial out from PSTN.
If aa is set to “01”, it means that the call is not to dial out through PSTN and presented by
the vocal signal of busy line.
If aa is set to “02”, it means that the phone call is forced to dial out through PSTN.
bb needs to be inputted identical to aa.
Notice:
that this echo function will be halt if there is actual echo sound, reply or vocal
response occurred therein.
Default setting = 02 (forced to dial out through PSTN).
(13)Supervisor Password Setting
Once the supervisor’s password has been set, any one who wants to do function
setting must pass the password verification. To set the supervisor’s password :
Format : *#** (wait for confirming voice)
76aaaabbbb#
aaaa is the supervisor password range from 0000 ~ 9999
bbbb : should be the same as aaaa
after that, anyone who wants to do function setting must pass the authentication
first.
*#**77aaaa# while aaaa is the supervisor’s password.