Portable Winch 600MH-Li, Руководство пользователя

Страница: 4 / 14

EN
NEVER USE THE MACHINE ON WET GRASS. WALK AT A
STEADY PACE, HOLD ON TO THE HANDLE AND WALK
NEVER RUN.
IF THE MACHINE STARTS TO VIBRATE ABNORMALLY, STOP
THE ENGINE AND CHECK IMMEDIATELY FOR THE CAUSE.
STRONG VIBRATIONS ARE USUALLY A SIGN SOMETHING IS WRONG.
STOP THE ENGINE BEFORE CLEANING, INSPECTION OR
REPAIRS.
BOLTS AND NUTS, ESPECIALLY THE BOLTS USED TO ATTACH
THE BLADE SHOULD ALWAYS BE PROPERLY TIGHTENED.
KEEP THE MACHINE IN GOOD CONDITION.
NEVER TAMPER WITH SAFETY DEVICES. REGULARLY CHECK
THEY ARE WORKING PROPERLY.
KEEP GRASS, LEAVES OR DEBRIS OF ANY KIND FROM
ACCUMULATING ON THE MACHINE OR IN FRONT OF THE
BLADE. CLEAN OIL OR FUEL SPILLAGES.
ALLOW THE MACHINE TO COOL BEFORE STORING IT.
IF YOU HIT AN OBJECT, STOP THE MACHINE AND CHECK
FOR DAMAGE. BEFORE RESTARTING, REPAIR THE DAMAGE
IF NECESSARY.
THE MACHINE'S BLADE CAN CUT. WRAP THE BLADE OR
WEAR GLOVES AND BE CAREFUL WHEN PERFORMING
MAINTENANCE ON THE BLADE.
2. Checks before use
2.1 Upon reception
Inspect the box to detect any obvious damage. If a part is missing or
damaged, notify the carrier immediately. Please refer to the
assembly manual for the contents of your machine.
2.2 Assembly and start-up
2.2.1 Assembly
The Perimeter Wire Machine 600MH-Li
TM
was completely assembled
at the factory except for the following parts: blade, wire guide, sliding
foot, blade pulley cover, wheels and handle. To ensure safe and
appropriate operation, these parts must be attached securely. Use
the
appropriate wrench to ensure they are tightened sufficiently.
To assemble the components mentioned
above,
please follow the instructions in the
600MH-Li USER MANUAL.
IT IS ESSENTIAL THAT ALL OF
THE STEPS ARE CARRIED
OUT
2.2.2 Battery (sold separately)
THE BATTERY IS HALF-CHARGED AT THE TIME OF PURCHASE.
BEFORE USING YOUR MACHINE FOR THE FIRST TIME,
FOLLOW ALL THE INSTRUCTIONS AND GUIDELINES INDICATED IN THE BATTERY AND
CHARGER MANUFACTURER GUIDES. REMOVE THE BATTERY BEFORE STORING THE
MACHINE FOR AN EXTENDED PERIOD. FULLY CHARGE THE BATTERY BEFORE USING
THE MACHINE AGAIN. THIS BATTERY HAS NO
MEMORY EFFECT.
2.2.3 Installing the battery
2.2.4 To remove the battery
A) Press the battery release button located above the
battery. This allows the battery to easily be removed
from the device.
B) Remove the battery.
A) Open the battery's protective cover.
A
B) Insert the battery (plastic part towards the compartment).
C) Press the battery in until you hear
a ''click''.
D) Close the cover.
B
C
D
4
A
B B