PORT S31A, Руководство пользователя

Страница: 24 / 26

Hardware Troubleshooting
1) After installation, touch sensing
keypad is not responding
a) In this case, first check that the
positive and negatve electrodes of the
battery have been installed upside
down and whether the battery has
enough power
b) Remove the back panel and see if
it’s connected
c) To eliminate the above situation,
you need to remove the lock, check
whether the wires of the lock body are
squeezed, and then re-wire
2) Why does the smart lock consume
so much power?
The primary reason for so much
power consumption is that this device
requires a large standby power. What
could also affect this is a short circuit
3) Can you adjust the volume? a) The Bluetooth system can only turn
the sound On or Off and cannot adjust
the volume
b) The non-Bluetooth system can
adjust the volume
4) There is no response to pressing
the handle on the outside if the door;
and the inside of the door is
responsive, but the verification and
motor is normal
It may be that the triangle direction
on the clutch has an error, please
check connection
5) The keys do not respond, and the
lights are off
Most of the time this happens because
the door lock is out of power
6) How many times can I put the
incorrect passcode before it locks me
out?
Bluetooth: Enter wrong 5 times and it
locks for 30 seconds
7) How many records can be in the
lock?
• Bluetooth: 500
• Non-Bluetooth: 10,000
8) How many locks can a card match
at the same time?
No Limit
9) I cannot automatically wake lock
when unlocking
Change the spring wire
24