42
Operating Manual
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
e
By resetting the charger to the factory settings,
the initial password is reactivated. However, this
will cause all the settings to be reset to the
factory settings.
f
Refer to chapter “Private mode/open mode” on
page 42.
Serial number of the charger
The serial number of the charger can be found in the
following places:
– In the letter containing access data after the
designation
Serial number
– On the identification plate (on the back of the
control unit) after the abbreviation
SN
– In the web application:
Settings
>
Maintenance
>
Device information
Private mode/open mode
The charger is configured to open mode upon
delivery. The energy manager is thus automatically
detected and connected in the home network.
It is recommended to switch to private mode
following initial operation.
Activating private mode
1.
Navigate to
Connections
>
Energy manager
in
the web application.
2.
Activate
Secure mode
.
To connect the energy manager in private mode, the
web application must be confirmed.
f
Refer to chapter “Establishing a connection in the
web application of the charger” on page 41.
Resetting to factory settings
All your settings will be deleted if you activate this
function. Moreover, all passwords will be reset to the
initial passwords indicated in the letter containing
your access data.
1.
Press and hold the
CHARGE
STATUS
button and
the
MULTI
-
FUNCTION
BUTTON
simultaneously for
5 seconds.
The
CHARGER
indicator light flashes white when
you do so.
2.
As soon as the
CHARGER
indicator light stops
flashing, release the
MULTI
-
FUNCTION
BUTTON
and keep the
CHARGE
STATUS
button pressed
for
2 seconds.
3.
Press and hold the
MULTI
-
FUNCTION
BUTTON
AGAIN
for 5 seconds.
The
CHARGER
indicator light flashes white when
you do so.
The charger is reset to the factory settings. In the
meantime, the indicator lights light up green.
The device is ready for operation once the self-
test has been completed successfully.
Resetting to factory settings is also possible via the
web application or at a qualified specialist workshop.
Porsche recommends a Porsche partner as they have
trained workshop personnel and the necessary parts
and tools.
f
For information on the web application, see the
manual at https://www.porsche.com/interna-
tional/aboutporsche/e-performance/help-and-
contact/
If you require a different language, please select
the appropriate website for your country.
Malfunctions
The charger indicates faults and malfunctions by the
indicator coming on or flashing red or yellow.
f
Refer to chapter “Control Unit” on page 36.
Information
This function is deactivated as standard in the
charger. In order to execute this function in the
charger, it must be enabled in the web application
(
Settings
>
System
>
Allow reset to factory
settings
).
NOTICE
Damage to the charger
e
If a fault persists or recurs, disconnect the charger
from the mains supply and contact a qualified
electrician. Porsche recommends a Porsche
partner as they have trained workshop personnel
and the necessary parts and tools.
