41
Operating Manual
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
connected (Status 5). The energy manager
settings (e.g. information on the charging current,
overload protection and optimised charging) are
adopted by the charger.
f
The procedure for establishing the connection to
the charger is described in the chapter "Adding an
EEBus device" in the web application instructions
for the Porsche Home Energy Manager.
f
Refer to the operating instructions of the energy
manager.
Establishing a connection in the web application of
the charger
If the charger is in private mode, an unknown energy
manager must be added in the web application of the
charger (
Connections
>
Energy manager
).
f
For information on the web application, see the
manual at https://www.porsche.com/interna-
tional/aboutporsche/e-performance/help-and-
contact/
If you require a different language, please select
the appropriate website for your country.
Re-connecting to the energy manager
If the charge status of the energy manager is acti-
vated, the charger automatically attempts to estab-
lish a connection to the last used PLC network.
Web Application
Calling up the web application of the charger
b
Charger is connected to the PLC network.
e
Enter the host name of the charger (
<Host name>
or
<Host name>/
) in the address line of the
browser. The host name is in the letter containing
access data.
– or –
Enter the IP address of the charger in the address
line of the browser. The IP address was issued by
the DHCP server during pairing of the device and
charger and can be viewed in the router settings.
f
Refer to chapter “Connecting charger to a PLC
network” on page 40.
f
For information on the web application, see the
manual at https://www.porsche.com/interna-
tional/aboutporsche/e-performance/help-and-
contact/
If you require a different language, please select
the appropriate website for your country.
f
For information on the host name refer to chapter
"Access data" on page 41.
Access data
Enclosed with the device is a letter containing the
access data, which contains all the necessary data for
the charger and the web application.
e
Keep the letter containing the access data in a
safe place.
f
Refer to chapter “Serial number of the charger” on
page 42.
The letter with the access data contains the following
data:
PUK
The PUK serves to reactivate the initial password.
e
If you lose your PUK, please contact a Porsche
partner.
Password for web application
The password is used for logging into the web appli-
cation.
When using the initial password:
e
If you lose or forget the initial password, please
contact a Porsche partner.
When using a password you set yourself:
e
If lost, the initial password can be restored using
the PUK. Alternatively, please contact a Porsche
partner.
Information
If lost, the access data valid upon delivery, such as the
initial password, can be obtained from a Porsche
partner.
– Have the serial number of the charger ready.
Designation
Meaning
Serial number
Serial number of the charger
Security ID
For secure connection with the
PLC modem
MAC
MAC address of home network
PLC interface
Web password
Initial password for web applica-
tion
Web Hostname For connecting to the web appli-
cation via a web browser
PUK
Personal unlocking key (security
field)
Information
The security field contains the unlocking key (PUK).
This field is printed over with a special ink that covers
the PUK.
Only after moistening this field under running water
does the ink fade, making the PUK visible. Do not rub
or scratch the field while dampening it, as the PUK
could otherwise be damaged.
