![Porsche CAYMAN - Скачать руководство пользователя страница 100](http://html1.mh-extra.com/html/porsche/cayman/cayman_owners-manual_1580222100.webp)
98
Instrument Panel and Multi-Function Display
Chrono Menu (Stopwatch)
You can use the stopwatch to measure any times,
e.g. on the race circuit or on work-related
journeys. Measured lap times can be stored and
evaluated if the vehicle is equipped with Porsche
Communication Management (PCM).
f
Please observe the chapter “SPORT DISPLAY”
in the separate PCM operating instructions.
Stopwatch on the dashboard
The stopwatch has an analoge and a digital
display.
The large pointer of the analog display measures
the seconds. The two small pointers measure
hours and minutes. The display re-starts at zero
after 12 hours.
Seconds and increments of
1/10th and 1/100th of a second can be read on
the digital display.
The digital display and the multi-function display
can show up to 99 hours and 59 minutes.
Stopwatch timing displays
The stopwatch time is displayed at different
positions on the dashboard:
– In the stopwatch on the dashboard.
– In the “
Chrono
” menu in the multi-function
display on the instrument panel.
– In the “
CAR
” main menu on the PCM.
Displaying the time on the stopwatch
You can configure the stopwatch on the
dashboard to display the time in the multi-function
display on the instrument panel.
For information on displaying the time on the
stopwatch:
f
Please see the chapter “DISPLAYING TIME IN
STOPWATCH ON DASHBOARD” on page 111.
Chrono on multi-function display
All stopwatch displays are started and stopped in
the “
Chrono
” menu on the multi-function display.
For instructions on using the multi-function
display:
f
Please see the chapter “OPERATING THE
MULTI-FUNCTION DISPLAY ON THE
INSTRUMENT PANEL” on page 81.
Information
If you exit the “
Chrono
” menu while the stopwatch
is running, measurement will continue.
The stopwatch stops after the ignition is switched
off. If the ignition is switched on again within
approx. 4 minutes, the stopwatch will continue to
run.
The only way to reset the stopwatch to zero is by
selecting “
Reset
” in the “
Chrono
” menu.
For information on resetting the stopwatch:
f
Please see the chapter “RESETTING THE
STOPWATCH TIME” on page 100.
1.
Main menu: Select “
Chrono
”
and confirm.
14_C7NF_21.book Seite 98 Mittwoch, 26. März 2014 12:15 12