Porsche Cayenne 2005, Руководство пользователя

Страница: 296 / 369

WWW.MANUALS.WS
WWW.MANUALS.WS
296
Practical Tips, Minor Repairs
+ = Positive terminal for jump lead starting
– = Grounding point for jump lead starting
4. Connect clamps of the compressor to the
jump lead starting terminals.
Always observe the following sequence:
– Open the cap of the positive terminal for jump
lead starting (
+
).
– Connect positive lead (red) B to the positive
terminal for jump lead starting ( + ).
– Connect negative lead (black) C to the nega-
tive terminal for jump lead starting (
–
).
Warning!
Danger of burning. The compressor filler
hose can become hot during the inflation
process.
f Wear gloves.
5. Switch on compressor with switch
D
.
The required filling pressure will be reached af-
ter a few minutes.
6. Switch off compressor with switch
D
.
7. Check filling pressure with pressure tester E .
Then reduce tire pressure or add more air if
necessary.
Recheck the filling pressure.
8. Unscrew filler hose of the compressor.
Reducing filling pressure on vehicles
without air suspension
1. Switch off compressor with switch D .
2. Open air bleed screw F until the correct filling
pressure is achieved.