Porsche Cayenne 2005, Руководство пользователя

Страница: 123 / 369

WWW.MANUALS.WS
WWW.MANUALS.WS
Controls, Safety, Instruments
123
Accelerating (e.g. to overtake)
Option 1
f Increase the speed as usual with the accelera-
tor.
When you ease off the accelerator, the previ-
ously stored value is set again.
Option 2
f
Push operating lever upwards into position
3
until the desired speed is reached.
The speed reached is maintained and stored
when the operating lever is released.
Option 3
f Push operating lever slightly upwards into po-
sition 3 (a maximum of 10 times).
The speed is increased by 1 mph (2 km/h).
Note on operation
Cruise control operation is automatically interrupt-
ed if the speed is increased by more than approx.
16 mph (25 km/h) for longer than 20 seconds.
Decelerating
Option 1
f Push operating lever down into position 4 until
the desired speed is reached.
The speed reached is maintained and stored
when the operating lever is released.
Option 2
f
Push operating lever slightly downwards into
position 4 (a maximum of 10 times).
The speed is reduced by 1 mph (2 km/h).
Interrupting cruise control operation
The speed driven before the interruption remains
stored in the memory.
f Push forward the operating lever to position 2
(it doesn’t engage) or
f Press brake pedal or
f Switch selector lever to position N .
f Please observe the chapter “TIPTRONIC S” on
Page 198.
Cruise control operation is interrupted
automatically:
– If the set vehicle speed is exceeded by more
than approx. 16 mph (25 km/h) for longer than
20 seconds.
– If the actual vehicle speed falls by approx.
6 mph (10 km/h) below the set vehicle speed
for longer than 5 seconds (e.g. upward
slopes).
– If Porsche Stability Management (PSM) inter-
venes for longer than 0.2 seconds.
– If Low Range is switched on.