Replacing bulbs
To avoid short circuits, turn off the respect-
ive electrical components when changing
light bulbs.
Keep bulbs free of grease and dirt. Hold
them only with a clean cloth or soft paper.
Do not use chemical cleaning agents for
the plastic lenses. Plastic lenses should
only be cleaned with water or a mild soap/
water solution.
We recommend you keep an assortment of
spare bulbs in the car.
When traveling abroad, remember that
some countries require spare bulbs as part
of the safety equipment.
Sealed Beam Headlights
Replacing light unit
1 - t u r n the ignition on
2 - turn light switch to position 2 to raise the
headlights
3 - turn the ignition off
4 - unscrew the 3 Philips screws (arrows)
and remove headlight cover and trim ring
5 - unscrew the 3 small Philips screws from
sealed beam securing ring and remove
ring
6 - unplug wires, replace sealed beam unit
and reconnect the wires
7 - reinstall sealed beam securing ring
8 - check lights
9 - reinstall trim ring and headlight cover.
65
