Porsche 1D6, Техническая информация

Страница: 5 / 12

Technical Information
Tequipment
27/07
ENU
6690
6
Figure 4
1.6 Remove foam insert from the inner side panel
⇒
Figure 4
-inset-
.
Figure 5
1.7
ONLY
for vehicles with level adjustment
control unit:
Pull up clamps on level adjustment control
unit support
⇒ Figure 5 -arrow- (if fitted) and
swivel control unit out of the bracket.
Figure 6
1.8 Loosen the two clips ⇒ Figure 6 -A,
arrows-
on the support for the rear-end
control unit ⇒ Figure 6 -A1- together with
the tilt sensor control unit (
⇒
Figure 6
-A2-
if
installed ⇒ Workshop Manual ’966319
Removing and installing control unit for tilt
sensor - section on "Removing"’
) and lay
support aside
⇒
Figure 6
-B-
.
2007© Porsche Cars North America, Inc.
Tequipment
Aug 15, 2007
Page 5 of 12