ENGLISH
The air circulation ducts inside the cabinet can be
removed without tools so that it is easy to clean
all surfaces. Rear and roof ducts have been fitted
with knurled-head screws with a coin slot for easy
loosening.
Clean the cabinet door gasket using a mild water
soluble detergent and check the condition of the
gasket. A silicone spray makes the gaskets flexible
and dirt-rejecting.
Cleaning in dishwasher is not recommendable
for the loose parts of the equipment.
Put back all removed parts and switch on the
equipment.
Ensure that the temperature has become to the normal level before using the equipment
again.
Operation failures
In case of alarm:
• see chapter ”Alarms”
If the cabinet fails to cool check that:
• the power supply is OK and the cabinet is switched ‘on’ there are indications on the
control panel if there is a power supply to the cabinet.
• the defrost LED is not lit
• the cabinet has not been overloaded or filled with warm products
• the air circulation for the condenser or inside the cabinet is not blocked
• the ambient temperature around the cabinet is not too high
• the condenser filter is not blocked
If the machinery makes a strange sound:
• check that the feet of the cabinet have been properly adjusted
• make sure that the cabinet does not rock when pushed from one or another of the front
corners
• check that loose items such as bottles in the cabinet are not knocking against each other
If the malfunction cannot be corrected by checking the above points prevent the goods from
spoiling by moving them to another cooling or freezing unit. Switch the faulty cabinet off,
remove the power supply from the wall socket and contact your dealer or service company.
9
