Porcelanosa noken PURE LINE 100180969 N199999250, Руководство пользователя

Страница: 15 / 20

15
ENG
Problem/Fault Possible Cause Remedy
water supply Ope Lack of n the
supply valves
Supply valves closed Open the supply valves
Clogged filters on supply valves Clean the filters
Twisted/ Kinked Supply hoses Connect hoses correctly
Clogged filter gaskets on the Control Unit Clean the filters
Power supply faulty Check the power supplier
Faulty socket Change the socket
Faulty power pack Replace the power pack
Faulty control unit
Cut the power supply for 5 sec. and reconnect it, if
problem persists please contact the customer
service/replace the control unit
Faulty/Damaged connecting
cable/connector between keyboard and
control unit
Check connection and if problem persists please
contact the customer service
Water running constantly Faulty control unit
Cut the power supply for 5 sec. and reconnect it, if
problem persists please contact the customer service/
replace the control unit
Low flow rate Low supply pressure Check supply pipes
Filters
open of supply valves are not enough
Open the filters further
Clogged filters Clean filters
Twisted/ Kinked Supply hoses Connect hoses correctly
Clogged filter gaskets on the Control Unit Clean the filters
Water temperature cannot be
adjusted
Water supply failure Check water supply/check the boiler
Too low temperature difference between
hot and cold water supply
Check water supply/check the boiler
Filters of supply valves are not enough
open
Open the filters further
Clogged filters Clean filters
Twisted/ Kinked Supply hoses Connect hoses correctly
Clogged filter gaskets on the Control Unit Clean the filters
Faulty control unit
Cut the power supply for 5 sec. and reconnect it, if
problem persists please contact the customer service/
replace the control unit
Dropping Tap Faulty control unit
Cut the power supply for 5 sec. and reconnect it, if
problem persists please contact the customer service/
replace the control unit
Too high minimum flow rate Faulty control unit
Cut the power supply for 5 sec. and reconnect it, if
problem persists please contact the customer service/
replace the control unit
Failure to provide either hot or cold
y l water on
Faulty control unit
Cut the power supply for 5 sec. and reconnect it, if
problem persists please contact the customer service/
replace the control unit
NOTE: The device must be turned off by disconnecting the power supply unit