UNPACK AND SET-UP(CONT.)
The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.
Align with the handle base and push it in until it
clicks into place.
To turn the tool on, depress the switch trigger. (Set the
forward/reverse lever in the middle then the switch is locked.)
To turn the tool off, release the switch trigger and allow the
cable to come to a compete stop.
INSTALLING/REMOVING BATTERY PACK
CONTROLS
Installing the battery pack
Variable speed switch trigger
Removing the battery pack
1. Hold the tools handle firmly.
2. Press and hold the lock buttons on both
sides of the battery pack, then slide it out.
