Step 4: Foot Brace Attachment
Attach Foot Brace (H) to Telescoping Legs
(A) using two 5/16”-18 x 1” Hex Head
Fasteners (K) and 5/16”Spring Washers (L)
for each Telescoping leg (A), with Fastener
heads recessed inside Foot Brace (H).
Now tighten the four 5/16”-18 x 1”
Hex Head Fasteners from Step 3
Attach Floor Levelers (V). Optional Casters
attach using 3/8” button head fasteners.
Step 6: Table Support Brace
Attachment
Place Table Support Brace (F) and Motor
Assembly (B) on underside of table. Locate
three guide holes for Motor Assembly (B).
Position Telescoping Leg (A) with shorter
hose (A, Right). Align Table Support Brace (F)
to guide holes and attach using four 1/4" x 1"
Hex Head Fasteners (M) and 1/4" Spring
Washers (N). Tighten using 7/16” socket
wrench.
Do not over-tighten or strip
Step 5: Hand-crank Assembly
Positioning
Place Hand-crank Assembly (B) on table
as shown.
Long Hose
Front Edge
Short Hose