Step 2: Piston Attachment
Insert hydraulic piston into center hole of Table
Support Brace (F) with piston top recessed inside
brace. Secure with 1/2" Retaining Ring (J), using pliers
to snap Retaining Ring into piston groove. Repeat for
second piston. Snap ring pliers and snap rings can be
used. Pull on piston to secure attachment.
Step 3: Telescoping Leg
Attachment
Insert piston foot into center of Telescoping Leg (A).
Piston hose port must route through "mouse hole"
of Telescoping Leg (A). Align Telescoping Leg (A) with
hose port facing center. Attach using two
5/16" -18 x 1" Hex Head Fasteners (K) and 5/16" Spring
Washers (L). Tighten using a 1/2" socket wrench.
Do
not completely tighten until Step 4
. Repeat for
second leg.
Step 1: Preparation
Unpack and identify all parts. Place Table Top (G)
upside down on padded surface and identify front
edge.
Be careful not to damage the hydraulic hose
Snap ring pliers
Snap rings
Keep hose routed through mouse hole to
avoid pinch points
Short Hose
Foot Brace
Long Hose
Motor Assembly
Telescoping Legs
Cross Brace
Table Brace
Control Box
and Switch
Front Edge
Table Top
Slotted groove on Telescoping Leg Faces in
Snap Ring
Piston
Piston Head
Table Brace
Hex Head Fasteners
Table Brace
Piston
Telescoping Leg
Piston Hose
Mouse Hole