Pope 101PB26, Руководство оператора, Страница: 17 / 24

BEFORE EACH USE:
■
Remove dirt and debris from the blower
exterior.
■
Inspect the engine, tank and hoses for
possible fuel leaks and repair as
necessary.
■
Inspect the engine cooling fins for
accumulations of debris and clean as
necessary.
■
Inspect the entire machine for damage,
loose or missing components or fasteners
and repair or replace as necessary.
Checking the Fuel Cap
The fuel cap contains a non-serviceable filter
and check valve. A clogged fuel filter causes
poor engine performance. If performance
improves when the fuel cap is loosened the
check valve may be faulty or the filter may be
clogged. Replace the fuel cap if necessary.
When replacing parts other than
engine or emissions parts, use only
Pope replacement parts. Use of any
other parts may create a hazard or
cause product damage.
WARNING:
A leaking fuel cap is a fire hazard and
must be replaced immediately.
WARNING:
Cleaning the Air Filter
Clean the air filter as indicated by the
maintenance schedule.
Follow these steps to clean the air filter.
1. Stop the engine.
2. Remove the spark plug boot.
3. Loosen the air cleaner cover retaining
screw by turning the knob counter
clockwise.
4. Remove the air filter cover.
5. Remove the air filter element.
6. Inspect the element. If the element is
distorted or damaged, replace it with a
new one.
7. Wash the element in clean fuel and
squeeze or blow dry.
8. Wash the air cleaner cover in clean fuel
and wipe or blow dry.
9. Install the element and cover and then
tighten the cover retaining screw.
10. Replace the spark plug boot.
Maintenance
– continued
Air Filter Element
17