21
4. Use
4.7 Clock setting
4.8 On / Off synchronization adjustment
ECO
IN
OUT
SET
h
1
ON
OFF
2
3
min
°C
%
A
h
min
°C
%
A
ECO
IN
OUT
SET
h
1
ON
OFF
2
3
min
°C
%
A
h
min
°C
%
A
Step 1 :
Go to the main menu by unlocking the control
panel.
Step 2 :
Push the button
to enter the clock setting
interface. Clock display
1
ON
OFF
2
3
A
flashes.
Step 3 :
Change the hours using the buttons
and
.
Step 4 :
Press again
to go to minute setting. Change
the minutes using the buttons
and
.
Step 5 :
Press again
to confirm the setting and return
to the main menu.
This function is used to program the start and stop time.
You can program up to 3 different starts and stops. The
setting is done as follows:
Step 1 :
Go to the main menu by unlocking the control
panel.
Step 2 :
Press the button for 5 seconds
to enter the
setting of the On / off groups.
Step 3 :
1
ON
OFF
2
3
A
Group 1 is displayed as well as the
ON action mode.
Step 4 :
Change the hours using the buttons
and
.
Step 5 :
Press again
to go to minute setting. Change
the minutes using the buttons
and
.
Step 6 :
Press again
to go to stop time ‘‘ OFF ’’
1
ON
OFF
2
3
A
and repeat steps 4 and 5.
Step 7 :
To go to group 2 and 3 press the button
and repeat steps 4, 5 and 6.
Step 8 :
Push the button
to confirm the settings
and return to the main menu.
1
ON
OFF
2
3
A
Configurable
groups
Action Type
